|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
INDEX
E
|
|
|
E
|
|
|
CR19
|
ENGINE |
|
CR20
|
ESCAPE HATCH (FUNNY CARS) |
|
CR21
|
EXHAUST |
|
|
| ARTICLE: | ||
| CR19: ENGINE | ||
|
With the exception of exhibition vehicles, all engines used in the Drag Racing must be of automotive type origin. Crankshaft centre lines may not exceed 600mm from the ground in any class. |
||
| CR20: ESCAPE HATCH (FUNNY CARS) | ||
| A working escape hatch must be installed in the roof of all Funny Car bodies that have enclosed side windows to permit easy driver exit. See through types are prohibited. Minimum size is 500mm x 500mm. Roof hatch must be permanently attached and hinged at the front and must have a release mechanism operable from both inside and outside the car. | ||
| CR21: EXHAUST | ||
| Each car, regardless of class, must be equipped with exhaust pipes to direct the exhaust gasses out of the car body to the rear or side of the car away from the driver, fuel tank and strip surface. Individual exhaust stacks must incorporate a metal connecting strap to prevent loss of one or more stacks during competition. | ||
|
MSA
Technical Committee
|